What To Do

Categories

Social Bookmarks

Feeds

Help!: [Closed] Welcome to Help!

Bottom of Page

1 to 12 of 12

  1.  
    • CommentAuthorHero!!kevin@mmf
    • CommentTimeJul 27th 2007
     
    kevin@mmf

    We created this section to allow you to post your questions about the site.   Jeff and I will both be monitoring this section to make sure you get a timely response.  Please submit your question to this section first before sending us feedback!

    Cheers,

    -Kevin
    Co-Founder, MapMyFitness

    • CommentAuthorFree Membercwaters
    • CommentTimeJul 27th 2007
     
    cwaters

    Hi.  I made a mistake in entering a run in my training log.  I can't seem to be able to delete a route or an entry.  Any suggestions?

     By the way, I am enjoying this site.  It's fun and it saves gallons of gas (used to trace running routes by driving the route after I ran it.

     Related question:  I like to run in a local park.  Is there anyway to map routes and elevations if you are running on trails?

    Thank you,

    Chris

    • CommentAuthorHero!!kevin@mmf
    • CommentTimeJul 27th 2007
     
    kevin@mmf
    cwaters:

    Hi.  I made a mistake in entering a run in my training log.  I can't seem to be able to delete a route or an entry.  Any suggestions?

    You can delete the workout by clicking on it to view/edit and click the delete button.

    To delete a route, go to 'My Runs' and then click the 'edit' link next to the route name -- you can delete a route from here...

    Related question:  I like to run in a local park.  Is there anyway to map routes and elevations if you are running on trails?

    If you can view the trails in a satellite view, you should be able to map your route.  Also, if there is a topo-map for your region, sometimes the topo maps show trails as well...

    Cheers,

    -Kevin

    • CommentAuthorFree Memberrosingm
    • CommentTimeJul 28th 2007
     
    rosingm
    I'm using the site for hte first time and I thought I'd be able to create a cue sheet with cumalative and interval milage before turns.  Is there a way to do that or do I need to just keep and eye on the distance in the lower right...?
    • CommentAuthorFree Membersmsm1
    • CommentTimeJul 29th 2007
     
    smsm1
    rosingm:I'm using the site for hte first time and I thought I'd be able to create a cue sheet with cumalative and interval milage before turns.  Is there a way to do that or do I need to just keep and eye on the distance in the lower right...?

     You can add notes to the routes, thus allowing turn by turn instructions. If you have follow roads turned on these are auto generated.

    • CommentAuthorFree Membergappo
    • CommentTimeJul 29th 2007
     
    gappo

    Kevin

    Is there any way to search for a specific place mid route? All I can seem to do is search for a start point! Also what is the reason for the "distance between the two points is too large" warning, what is wrong with two points slightly further than normal.

    Thanks in advance for your assistance.

    Jack 

    • CommentAuthorFree Memberbo254
    • CommentTimeJul 30th 2007
     
    bo254
    I really love this site. Now I don't have to get in the car a drive where I've just walked. Training log motivates me to get out and get moving.
    • CommentAuthorFree Membercwood
    • CommentTimeJul 31st 2007
     
    cwood

    Hi I made an error in my training log...I changed an existing route & saved it as a new route thinking it would only change that days entry but it changed all the previous entries of that route & now I can't find a way to get these back again...help :-(

    Fab site by the way...really good at motivating me to add all my exercising routines & of course helps me find time to do my running...if it's written down you can't possibly  not do it :-)

    • CommentAuthorFree MemberDBCapeCod
    • CommentTimeAug 4th 2007
     
    DBCapeCod
    I was ready to switch from using bikely.com to your site (I love your out and back feature), but I haven't been able to successfully share a map to my blog using your embed code.   Any hints beyond shutting the convert line breaks off?  I am able to share bikely.com maps with no problem at all.
    • CommentAuthorPremium Member!jeff@mmf
    • CommentTimeAug 4th 2007
     
    jeff@mmf

    Hi DB-

     Here's some alternative code that should work in a single line: 

    <iframe src="http://js.mapmyfitness.com/embed/blogview.html?r=6b190440a0bd00eaa93c6b7859744df2&t=run" height="675px" width="100%" frameborder="0"><a href="http://mapmyrun.com/view_route?r=$6b190440a0bd00eaa93c6b7859744df2</iframe>

     Note that mmf_route should be the same value that we give you on the blog page.

     This is the code that gets inserted "under the hood" of our blog insert Javascript, and if you're familiar with

     Due to other users having similar issues, we'll be adding these instructions to the site soon.
    • CommentAuthorFree Memberrosingm
    • CommentTimeAug 5th 2007
     
    rosingm

    Jeff,

     Why does return to last point always bring me back to Greenland?

    • CommentAuthorPremium Member!jeff@mmf
    • CommentTimeAug 6th 2007
     
    jeff@mmf
    This discussion topic has been closed.  Please start a new discussion topic with your question, so we can track these better.

1 to 12 of 12

  1.